|
|
High-Reach Equipment
Telescopic forklift
Volvo
offers the VR-1056C telescopic forklift. This C-Series model is designed
to provide operators ergonomic functionality, increased power and
greater boom control. The VR-1056C features a 56-foot, two-inch lift
height, and 41-foot, six-inch forward reach, and has the Volvo patented
rear axle stabilization system. It allows operators to extend the boom
to its fullest reach without stabilizer deployment, and it carries 6,000
pounds to 56 feet, two inches with stabilizers, and 4,000 pounds to the
top without stabilizers.
Back to Top
Boomlifts
The SJ 40T and SJ 45T (pictured) boomlifts from Skyjack feature an analog-based control
system, relay-based electrical system and axle-based 4-wheel-drive
system. With no wheel motors or torque hubs, there are no hydraulic
hoses left unprotected from jobsite hazards, and the number of potential
hydraulic leak sites is reduced. The SJ 40T and SJ 45T also feature
Skyjack's direction sensing controls, which ensure the boomlift will
always drive and steer with respect to the operator rather than the
orientation of the base.
Back to Top
Self-propelled booms
The Bil-Jax 36XT and the 45XA
(pictured) self-propelled X-Booms feature hydraulic lift systems
identical to the trailer-mounted Summit Series 3632T and 4527A,
respectively. Patent-pending technology gives the X-Booms the leveling
capability to allow users to set up and begin operating the machines in
under 30 seconds.
Back to Top
Saws
Portable table saw
The 4100DG-09 10-inch portable jobsite table saw from Bosch is designed to be precise and
durable. Features include the Digital Rip Fence, which incorporates a
high-visibility LCD gauge and display that magnetically attaches to the
SquareLock Rip Fence. Designed for trueness, any measurement is accurate
to 1/64 or .010-inch, while offering readouts in increments of 1/8,
1/16, and 1/32-inch. The modular Smart Guard System, designed for
portable table saws, includes a blade guard, riving knife and
anti-kickback pawls.
Back to Top
Reciprocating saw
Hitachi Power
Tools introduces its first low-vibration reciprocating saw featuring
User Vibration Protection technology that reduces motor vibration and
decreases end-user fatigue. The 9.7-pound CR13VBY reciprocating saw
features a swing-cutting mechanism, and variable-speed dial and trigger
for control and improved cutting speed. The CR13VBY also offers a
tool-less blade change so blades can be quickly mounted and replaced
with the simple press of a lever. For convenience, the blades can be
inserted in either direction (upward or downward). The CR13VBY delivers
a stroke length of 1 1/4 inch at up to 3,000 spm.
Back to Top
Lawn & Garden Equipment
Compact wheel loader
The Terex TL60 compact wheel
loader features articulated steering for increased stability over
skid-steer design. A universal SSL quick coupler provides for adaptation
of skid-steer attachments, and for tool carrier applications true
parallel lift loader linkage self-levels in both raise and lower
functions. The TL60 features a bucket capacity of 0.65 to 1.3 cubic
yards and a breakout force of 8,325 pounds.
Back to Top
Brush shredder
The new BrushHound 40 Extreme brush shredder from RockHound Attachments uses its
triple knife option to shred 8-inch vegetation using a standard
excavator auxiliary hydraulic circuit. It features a direct-drive
high-pressure hydraulic motor that needs only 24 gpm for maximum
performance. At 1,350 pounds, the shredder can mount to mid-sized 18K
class excavators and backhoes.
Back to Top
Self-propelled stump
cutter
The RG 1635 Super Junior lightweight self-propelled stump cutter
from Rayco is designed to deliver
maximum productivity at an affordable price. It offers a twin-cylinder,
25-hp Kohler engine, or a twin-cylinder 35-hp Vanguard engine. Other
features include hydraulic steering with a pivoting front axel,
anti-creep hill brake, variable travel speed and a quick-stop cutter
wheel.
Back to Top
Concrete Equipment
Walk-behind power trowel
Arrow-Master introduces
the F-Series direct-drive, walk-behind power trowels. The direct-drive
gear case and lower center of gravity provide reliable power with less
wobble and side torque, for a smoother finish. The walk-behind power
trowel also features a fully enclosed spider assembly, which protects
the blade arm and pitch-control components, and allows for easier
cleanup. The F-Series is available in 30-, 36- and 46-inch diameters, as
well as a wide range of engines and horsepower ratings.
Back to Top
Concrete pump
The Blastcrete Model RD6536
skid-steer concrete pump is designed to pump up to ¾-inch aggregate
concrete with a skid steer with 15 gpm auxiliary hydraulics up to 25
cubic yards per hour. The RD6536 can pump in both forward and reverse,
and can pump various types of viscous material including sludge, sewage
and draining pounds. Other uses include shortcrete, floor overlayment,
masonry grout and ICF.
Back to Top
Other Products
Heaters
The Premier 80 and Premier 170 heaters from L.B. White offer new features
including a strengthened and redesigned heater case with new flush doors
to help withstand the bumping and jostling of travel to and from
jobsites and to improve weather resistance. Air distribution accessories
connect to the heater with a clean and easy-to-use screw, making the
connection to the heater tighter. A no-tools-needed regulator and
15-foot hose are other enhancements.
Back to Top
Offshore light tower
The Offshore Light Tower from Gulf Engine & Equipment features a
Kubota 3-cylinder liquid-cooled diesel engine. The skid design ensures
protection to all components and the engine/generator is rated for
continuous-duty operation. The tower features four metal halon 400-watt
lights with fixtures, and includes a retractable SO cord and circuit
breaker protection in a weatherproof enclosure.
Back to Top
|
|
You are subscribed to this newsletter as #email#
To get this newsletter in a different format (Text or HTML),
or to change your e-mail address, please visit your profile
page to change your delivery preferences.
For questions concerning delivery of this newsletter, please contact our
Customer Service Department at:
Customer Service Department
RER Magazine
A Penton Media publication
US Toll Free: 866-505-7173
International: 847-763-9504
Email:rermag@pbinews.com
Penton Media | 249 W. 17th Street | New York, NY 10011
Copyright 2008, Penton Media. All rights reserved. This article is
protected by United States copyright and other intellectual property
laws and may not be reproduced, rewritten, distributed, re-disseminated,
transmitted,
displayed, published or broadcast, directly or indirectly, in any medium
without the prior written permission of Penton Media.
|
|
