|
|
Material Handlers
Stock pickers
JLG Mobile Stock Pickers are
available with widths ranging from 31.5 inches to 33 inches, and lengths
ranging from 60 inches to 74 inches. They are designed to fit easily
into most freight elevators and narrow passageways. The MSP Series
features three models with platform heights of 10, 15 and 20 feet, and
platform capacities ranging from 350 to 500 pounds, and total carrying
capacity up to 850 pounds. Stowed heights range from 56 inches to 78
inches.
Back to Top
Mud buggy
Stone Construction
Equipment offers the SB1600 Stone Mud Buggy, which has a 2,500-pound
load capacity and a 13-hp Honda engine. Designed to move concrete,
mortar, gravel, dirt and debris, the Mud Buggy features an
easy-to-clean, heavy-duty polyethylene tub that is designed and
contoured to control splash. The FB1000 Mud Buggy (pictured) features
the versatility of three machines -- a stake bed, flat bed and
extended flat bed. The stake bed configuration can carry up to 10 cubic
feet with a load capacity of 2,500 pounds.
Back to Top
Saws
Chain saw
Shindaiwa's model 490 chain
saw features a 47.9-cc displacement, a 3.5-hp engine and weighs 10.2
pounds. The 490 is equipped with a durable hand guard and inertia chain
brake system for fast, positive braking, and a full anti-vibration
system for reduced operator fatigue. The chain-tensioning adjustment
screw is located on the side of the clutch cover for easy access. The
chain saw also features die-cast crankcases, chrome-plated cylinder, and
a two-ring piston design.
Back to Top
Walk-behind pavement saws
The SS-7060 walk-behind pavement saw from Sanders Saws features stay-level
handles that stay level regardless of the saw's operating position. The
saw has five lubrication points that require service at 125 hours. These
lubrication points match engine oil service intervals and eliminate most
daily maintenance requirements. Fueled by a 60-hp Deutz diesel engine,
the SS-7060 saw has a 36-inch blade capacity and a maximum cutting depth
of 15 inches. The unit weighs 1,725 pounds.
Back to Top
Metal cutting saws
Mi-T-M's metal cutting saws
feature a cover design that collects virtually all chips and sparks.
Other features include a 3,500-rpm, 6-amp motor; chip collector and
blade housing; 7-inch blade diameter; 45-degree bevel angle adjustment
capacity; convenient guide edge; high-strength chrome-plated steel base;
soft comfort-grip handle; and guide handle.
Back to Top
Compaction Equipment
Vibratory plate
MBW's GP3550 vibratory plate
travels at a speed of 110 feet per minute, which is 20-percent faster
than the GP3000, the previous model. The new machine features a deck
equipped with a full roll cage as standard equipment with provisions for
an optional water tank for asphalt compaction. The base plate is
self-cleaning with an open sided plate design that allows material to
flow out and away from the belt/pulley assembly during operation.
Back to Top
Tandem-drum vibratory
rollers
Case Construction Equipment
announces the upgrade of its DV Series tandem-drum vibratory rollers to
Tier-3 engines that deliver from 31- to 48-hp, which is up from 27- to
38-hp. The tandem-drum line features high centrifugal force, dual
frequency and a hydrostatic drive that provides traction and smooth
performance even on steep slopes, according to the manufacturer. The
DV201, DV202 and DV204 (pictured) models range from operating weights of
5,510 to 7,720 pounds, and with drum widths from 39.4 to 51.2 inches.
Drum frequency on DV rollers ranges from 3,180 to 3,720 vpm with
centrifugal forces from 4,580 to 8,877 pounds.
Back to Top
Vibratory plate
compactors
Arrow-Master introduces
the P-Series vibratory plate compactors. The vibration system
incorporates a full-width weight shaft and heavy-duty tapered roller
bearings directly into the base. Each unit has a reversible guide handle
and double-formed leading edge for improved climbing. The protective
roll bar is designed to provide improved engine and component protection
with a balanced attachment point at the center for lifting. The
compactors feature travel rates up to 135 feet per minute and
centrifugal forces ranging from 2,500 to 5,300 pounds.
Back to Top
Chippers/Shredders
Wood chippers
JP Carlton offers
6-inch, 9-inch, 12-inch and 18-inch wood chippers for landscape, tree
maintenance and land-clearing applications. Heavy-duty construction,
including a form-welded frame, Torflex axle strength and construction
grade tires are standard on all models. In addition, Carlton chippers
feature high-speed dynamically balanced disk rounds for maximum chipping
power.
Back to Top
Brush chipper
The BC1000XL brush chipper from Vermeer is powered by an 85-hp diesel
engine that can cut through 12-inch diameter material with improved
efficiency. The unit features one of the largest feed openings in its
class at 12 inches tall and 17 inches wide, reducing the need to trim
material before it is fed into the chipper. It is also equipped with a
large 25-gallon fuel tank for longer working sessions, gear-driven
discharge-chute rotation for multiple chute positions, and dual-edged
cutter knives for reduced cutter expense.
Back to Top
Other Products
Lighting package
In addition to the standard Night-Lite Pro (pictured), Allmand now offers the Night-Lite Pro
International, Night-Lite Pro Arctic Special and the Night-Lite Pro CSA
Approved. The International package features two Schuko receptacles and
a 6-kW, 220-volt, 50-hertz power generator to make it suitable for
locations outside the United States. Also, the CSA package meets all
Canadian Standards Association requirements with a VIN [what is a VIN
package??] package, UL-approved luminaire and CSA-approved wiring
harness. Designed for cold-weather environments, the Arctic Special
package features an engine block heater, heavy-duty battery with an
electric battery blanket, a remote oil drain, tubes in the tires and a
CSA-approved harness.
Back to Top
Tractor
Kioti Tractor introduces
the DK45SE HST tractor. The tractor comes equipped with hydrostatic
transmission, which simplifies operation of the tractor and improves
productivity. The DK45SE HST has a lifting capacity of 2,493 pounds and
is designed with a three-point hitch for easy mounting of attachments or
implements.
Back to Top
Induction transmitter
The Ridgid SeekTech ST-33Q
super induction transmitter is designed to be used with Ridgid locators,
which are used to trace underground pipe, cable and other metallic
lines. When used in induction mode, the ST-33Q induces at 8 kHz and 33
kHz. The unit comes equipped with six preset frequencies that can be
used when directly connected to the target. In addition, end users have
the ability to set their own frequency providing the versatility of use
with any receiver. The ST-33Q's LCD monitor displays the operating mode,
battery power level and current strength. The ST-33Q operates using six
D-cell batteries. A jack is provided for the optional inductive signal
clamp. Two 15-foot lead wires provide ample reach when used in
direct-connect mode.
Back to Top
|
|
You are subscribed to this newsletter as #email#
To get this newsletter in a different format (Text or HTML),
or to change your e-mail address, please visit your profile
page to change your delivery preferences.
For questions concerning delivery of this newsletter, please contact our
Customer Service Department at:
Customer Service Department
RER Magazine
A Penton Media publication
US Toll Free: 866-505-7173
International: 847-763-9504
Email:rermag@pbinews.com
Penton Media | 249 W. 17th Street | New York, NY 10011
Copyright 2007, Penton Media. All rights reserved. This article is
protected by United States copyright and other intellectual property
laws and may not be reproduced, rewritten, distributed, re-disseminated,
transmitted,
displayed, published or broadcast, directly or indirectly, in any medium
without the prior written permission of Penton Media.
|
|
