|
|
Compact Equipment
Telescopic handler
Gehl introduces the RS5-19
telescopic handler, which is designed with a compact frame and a tight
turning radius of 11 feet. The RS5-19 is a low-profile machine with an
overall height of 6 feet, 4 inches making it easy to operate in
buildings, under parking garages and in confined areas. The boom reaches
a height of 19 feet, 1 inch and the telescopic handler is designed to
meet the needs for a 5,000-pound lift capacity machine.
Back to Top
Telehandler
Mustang Manufacturing
introduces the model 519 telehandler to the compact market. The 519
offers 19 feet of lift height and 5,500 pounds maximum lift capacity on
a compact frame. The compact size of the machine allows an operator to
easily transport the unit to the worksite on a trailer behind a one-ton
truck. The frame of the telehandler -- with a length of 148 inches,
width of 71 inches and height of 76 inches -- makes the machine suited
for tight jobsites. A 64-hp Deutz diesel engine powers the 519, which
boasts a two-speed hydraulic transmission for low-end power while
providing a quick transport speed up to 15 mph.
Back to Top
Saws
Chain saw
Tanaka introduces the
ECV-5601 chain saw, which is designed to provide maximum power for
firewood and farm use. The chain saw is powered by a 50-cc, 3.6-hp
two-stroke engine. The ECV-5601 weighs 11.2 pounds and comes equipped
with a 20-inch bar, and chain with 0.325-inch pitch. The chain saw
features a six-point anti-vibration system and a one-year commercial
warranty.
Back to Top
Walk-behind saw
Diamond Products
introduces the Core Cut CC1800XL portable walk-behind saw, which is
available as a push or self-propelled model. The saw features new,
sturdier handles that can be mounted pointing in or out. Other new
features include a lift bar, improved battery access and a water valve.
The CC1800XL is available with a choice of 14-inch or 20-inch blade
guards and has a maximum cutting depth of 7 5/8 inches with a 20-inch
guard.
Back to Top
Random crack saw
Designed to follow random crack patterns in asphalt and concrete
surfaces, General Equipment's
CS8 random crack saw uses 8-inch diameter, dry cut-type diamond blades
to produce smooth-sided cuts for proper crack-filling procedures. A
center-mounted blade configuration allows the CS8 to center pivot about
its own axis to follow random crack patterns. Maximum cutting width is
1/2 inch and maximum straight-line cutting depth is 1 1/2 inches.
Back to Top
Outdoor Power Equipment
Rear-tine tiller
Honda's rear-tine
tiller, the FRC800, features a front bumper guard, and a heavy-duty
transmission, debris shield, and controls enhance durability for rental
and commercial applications. The tiller also features 12-inch tines for
deep tilling to break up harder soils. Powered by a GX series 4-stroke
engine, the FRC800 is easy to start and offers virtually smoke-free
operation with ultra low emissions. The Cyclone air filter allows for
600-percent longer service intervals.
Back to Top
Backpack blower
The John Deere BP65LE
backpack blower features a heavy-duty 64.7cc John Deere M-Series low
emission engine. This model features 190-mph air velocity and 630-cfm
air volume at the end of the tube. Padded backpack harness absorbs
vibration for all-day comfort, and fully adjustable straps fit every
size. The BP65LE also features an electronic ignition for low
maintenance, a large muffler for quieter operation and weighs 21.4
pounds.
Back to Top
Generators
Conventional generators
Subaru Industrial Engines
presents its line of conventional generators, constructed to handle the
tough, rugged demands of contractors, homeowners and recreational users
while meeting environmental standards. The RGX2900, RGX3600, RGX4800 and
RGX4800E models use Subaru EX series overhead cam engines, with maximum
outputs ranging between 2,900 and 4,800 watts. The RGV6100, RGV6100E,
RGV7500, RGV7500E, RGV12100 and RGV13100T (pictured) use Subaru EH
series overhead-valve engines. Maximum outputs for the RGV line range
from 5,800 to 13,000 watts.
Back to Top
Diesel generator
The KDE5000TA diesel generator from Kipor North America features
a maximum output of 5.0 kVA. The low noise design of its enclosure and
the addition of an intake silencer and resonator make the unit one of
the quietest portable diesel generators on the market, the company says.
The KDE5000TA has a digital control panel that enables the operator to
view generator performance, load characteristics, voltage, power,
frequency, generator total run time and battery charge voltage. In the
case of a an unexpected shutdown, the front panel will display a code
that informs the operator of the nature of the fault, such as low oil
pressure, under/over voltage, under/over frequency, current overload or
battery charge failure.
Back to Top
Generator
Terex introduces the T45 Super
Quiet generator, which features a prime output rating of 45 kVA and a
fuel capacity of 64 gallons. It also features 64 dbA at 23 feet. A
4-cylinder, turbo-charged, 27-hp Isuzu diesel engine powers the T45,
which offers 29 hours of run time at 75 percent of load. The generator
output is monitored by an overcurrent relay, which works with a shunt
trip breaker system to protect the unit.
Back to Top
Other Products
Emission-compliant engine
The Perkins 800 Series of
naturally aspirated and turbocharged, 4-cylinder engines offers a
capacity of 3.3 liters. The engines meet all the requirements of EC
Stage IIIA and EPA Tier 3 off-highway emissions legislation. An increase
in top tank temperature (110 to 112 degrees Celsius) minimizes impact on
heat rejection and provides customers with ease of installation. The
engine series incorporates a number of features to ensure productivity
and durability on the job, including strengthened cast-iron cylinder
block to give rigidity and long life, a mechanical rotary fuel injection
pump and advanced designed cross-flow cylinder heads to give an improved
level of combustion efficiency.
Back to Top
Spray-painting systems
Earlex offers a
line of HVLP spray-painting systems for use in detail work to large
inside and outside jobs for various applications. HVLP systems can be
used for spraying most paints and stains, use one-third less paint
because of their paint transfer efficiency without brush marks, minimum
overspray, almost zero bounce back and less waste common with other
methods. The lightweight systems feature guns that are quiet and have
less vibration for the operator.
Back to Top
Product Spotlight
Spider Dismantles 10-Story
Banner
Seattle, Wash.-based Spider, a division of SafeWorks, LLC, recently supplied
suspended access equipment and rigging services to dismantle a 10-story
tall Nike advertisement featuring NBA stand-out, LeBron James, on the
Sherwin Williams Building -- Town Square in Cleveland.
In December 2005, Spider rented a variety of hoists, platforms and
accessories to the contractor responsible for erecting the massive
advertisement. Now, two years later, what went up must come down.
Bricklayers Inc. recently rented fourteen Zmac hoists, twelve 10-foot
modular platforms, eleven 5-foot modular platforms and several OBSF
rigging frames to dismantle the banner. Spider's Cleveland team of
experts supervised the rigging and dismantling.
The 2,700-pound mesh banner, which boasted a height of 110 feet and a
width of 212 feet, has been a tourist attraction in Cleveland for the
past two years.
Back to Top
ADVERTISEMENT
All New! 2007 RER Rental Equipment Rate Guide
Want to know how much equipment is renting for these days?
Find out in RER's original 2007 Rental Equipment Rate Guide. It's
the information you want and have come to expect from the Rate Guide,
featuring hundreds of types of equipment - from power tools to scissor
lifts - with listings and equipment rental rates. Published in August,
the 2007 Rental Equipment Rate Guide is a must-have resource for every
rental facility!
At just $46.95*, the 2007 Rental Equipment Rate Guide is an affordable
reference tool for your office. Place your order today! Call (866)
505-7173 or (402) 505-7173 if outside the U.S.
*Tax charges may apply.
|
|
You are subscribed to this newsletter as #email#
To get this newsletter in a different format (Text or HTML),
or to change your e-mail address, please visit your profile
page to change your delivery preferences.
For questions concerning delivery of this newsletter, please contact our
Customer Service Department at:
Customer Service Department
RER Magazine
A Penton Media publication
US Toll Free: 866-505-7173
International: 847-763-9504
Email:rermag@pbinews.com
Penton Media | 249 W. 17th Street | New York, NY 10011
Copyright 2007, Penton Media. All rights reserved. This article is
protected by United States copyright and other intellectual property
laws and may not be reproduced, rewritten, distributed, re-disseminated,
transmitted,
displayed, published or broadcast, directly or indirectly, in any medium
without the prior written permission of Penton Media.
|
|
