|
|
Earth-Moving
Wheel loaders
John Deere's 444J, 544J,
624J and 644J Wheel loaders now include Tier 3-compliant engines that
deliver fuel efficiency, wet sleeve cylinders for long life, and precise
injections. The 644J now features John Deere's exclusive Quad-Cool
cooling system, resistant to plugging and easy to clean. Exceptional
breakout force, easy control and smooth operation deliver efficient
digging, providing quick cycle times with less spillage.
Back to Top
Mini-skid steer
The Boxer 320 model mini-skid steer from Compact Power is a dedicated
track machine that comes standard with a 7-inch-wide rubber track
producing 3.2 psi of ground pressure to reduce damage to existing lawns
and landscapes. The 320 also offers a 20-hp Kohler air-cooled engine and
a two-pump, 3,000 psi hydraulic operating system that develops 8 gpm of
hydraulic flow to run the machine's auxiliary and propulsion systems.
Back to Top
Saws
Circular saw
Metabo's KSAP 18 cordless 6
1/2-inch circular saw is designed for cutting off and ripping lumber up
to 2 1/8-inch-thick. The 10.4-pound saw's high-efficiency motor provides
increased cuts per battery charge. The KSAP 18 bevel cuts up to 47
degrees and features a safety lock switch, a no-load speed of 2,500 rpm,
and an integrated dust extraction port that easily hooks up to a vacuum,
minimizing cleanup time and dust inhalation. Its maximum cutting depth
is 2 1/8 inches at 90 degrees and 1 5/8 inches at 45 degrees.
Back to Top
Compound miter saw
DeWalt introduces the DW713
10-inch compound miter saw, which replaces the DW703. The miter saw is
designed to cut various materials, including molding, sheet materials,
lumber, veneer and non-ferrous metal. The DW713 offers vertical capacity
to cut up to 3 1/2-inch base molding and 4 1/2-inch crown molding
against the fence. At a horizontal capacity, the DW713 has the ability
to cut up to a 2-inch by 6-inch piece of material at zero degrees and
2-inch by 4-inch materials at 45 degrees. For increased versatility, the
DW713 is equipped with a cam lock miter handle that quickly locks the
saw in place when performing miter cuts.
Back to Top
Compaction Equipment
Compactor
The PaverPacker 50 compactor from Pave Tech comes equipped with a Hatz
1B20 pull-start diesel engine with an oil bath air filter. The machine
travels at 90 feet per minute on top of pavers. The PaverPacker 50 has
5,000 pounds of centrifugal force. The plate is 16 inches long by 24
inches wide and comes with a mounted wheel kit.
Back to Top
Compactor attachment
Allied Construction Products
introduces the Skid-Pac Model 1000, which features vibratory compactor
technology and is mounted on a skid-steer loader. It can travel quickly
over soil in flatwork and is designed to deliver increased impact
energy. The Skid-Pac features a four-function valve and maintenance-free
oil splash bearing lubrication. A 9-foot square base plate covers the
outside width of the skid-steer tires to eliminate marks in the soil.
This attachment fits all manufacturers' skid steers in the 4,000-pound
to 14,000-pound weight range that use the universal-mounting
quick-change couplers.
Back to Top
Single-drum vibratory
rollers
Bomag introduces the
BW211-40 Series single-drum vibratory rollers. The 12-ton class rollers
are powered by a four-cylinder water-cooled Deutz diesel engine that
meets EPA Tier 3 requirements. The series is designed for efficient
compaction of granular, mixed and semi-cohesive soils, making it ideal
for a variety of site preparation applications, including highway
construction and maintenance, airports, streets and subdivisions,
parking lots and landfills. The BW211D-40 smooth drum roller (pictured)
features a 22,930-pound operating weight, while the BW211PD-40 padfoot
roller features a 25,785-pound operating weight.
Back to Top
Generators
Quiet generator
The Terex T120C Super Quiet
Generator comes with a prime output rating of 119 kVA at 95 kW.
Generator output is monitored by an overcurrent relay, which works with
a shunt trip breaker system to protect the unit. A 3-position voltage
selector switch allows the unit to provide 240- and 480-volt three phase
and 240-volt single phase. The T120C comes standard with a Cummins
engine with 196-gallon fuel capacity and 31 hours of run time at
75-percent load. A solid-state electronic governor results in stable
engine response to load changes. The unit has a 68 dBA rating at 23
feet.
Back to Top
Diesel generator
The DA7000SSWW diesel powered generator by Multiquip delivers a maximum of
7,000 watts and 6,000 continuous watts of ultimate power. It is designed
with a compact, sound-attenuated package with full instrumentation,
including an hour meter and warning lights for oil, water and batter.
Its quiet operation is 65.7 dBA at 23 feet. It features a brushless
alternator design, and it is powered by a 13.9-hp water-cooled Kubota
diesel engine.
Back to Top
Generator
Mi-T-M's 12,000-watt generator is
built with a Honda OHV engine that features a low-tone muffler to reduce
the noise level and an easy-access to the protected control panel.
Standard features include a lifting hook, wheel kit, volt meter, hour
meter, idle control and electric start for the engine.
Back to Top
Other Products
Mobile hydraulic hammer
The Arrow Hammer Model 1350 from Arrow-Master is a pneumatic-tired
hydraulic hammer that can be operated both on and off paved surfaces. An
80-hp John Deere diesel engine provides power for the unit. Standard
synchromesh transmission allows the 1350 to be driven at speeds up to 20
mph. The Arrow Hammer 1350 breaks, cuts and scores concrete, rock and
asphalt into sizes suitable for excavation, recovery, or cracking and
seating. It also compacts and tamps backfill, with adjustable impact up
to 13,000 foot-pounds. Standard features include mechanical or
electronic stroke control, ROPS, a pivoting mast for maximum impact on
uneven surfaces, stoplights and reflectors, and mechanical back-up
alarm.
Back to Top
Self-contained trailer
packages
Shark Pressure Washers
introduces two self-contained trailer packages designed for portable
washing stations. The packages feature single- (pictured) and
tandem-axle trailers and come standard with a 200- or 330-gallon
polyethylene water tank, two 3-way ball valves, recessed electrical
wiring and a rugged steel cage. The single-axle trailer has a weight
capacity of 3,300 pounds and the double-axle trailer features a capacity
of 6,000 pounds.
Back to Top
|
|
You are subscribed to this newsletter as #email#
To get this newsletter in a different format (Text or HTML),
or to change your e-mail address, please visit your profile
page to change your delivery preferences.
For questions concerning delivery of this newsletter, please contact our
Customer Service Department at:
Customer Service Department
RER Magazine
A Penton Media publication
US Toll Free: 866-505-7173
International: 847-763-9504
Email:rermag@pbinews.com
Penton Media | 249 W. 17th Street | New York, NY 10011
Copyright 2007, Penton Media. All rights reserved. This article is
protected by United States copyright and other intellectual property
laws and may not be reproduced, rewritten, distributed, re-disseminated,
transmitted,
displayed, published or broadcast, directly or indirectly, in any medium
without the prior written permission of Penton Media.
|
|
