Back to Top

Material Handlers
Telehandlers
The M Series telehandlers from New Holland Construction -- the M427, M428 (pictured) and the M459 -- meet a variety of lift-and-place and lift-and-carry requirements and are sized to work in a variety of applications including commercial and residential construction, agriculture and landscaping. The M428 has an operating weight of 24,118 pounds, a maximum lift height of 42 feet, and a lift capacity of 5,000 pounds. The M427 and M428 have a forward reach of 29 feet and the M459 has a forward reach of 31 feet.

Back to Top

Telescopic handler
Manitou offers the MT 6034 telescopic handler with 34 feet, 3 inches of lift height and a rated operating capacity of 6,000 pounds. The model features a welded box-section design boom and a 99-hp John Deere turbocharged diesel engine. Other design features include a rugged frame with reinforced C-channels, internal wet disc brakes for longer life and better stopping capability, and a negative (spring-applied, hydraulically-released) parking brake system. The negative parking brake applies automatically when the engine is shut off, or manually by pressing a rocker switch.

Back to Top

Abrasives & Blades
Diamond blade
Diamond Products introduces the Delux-Cut high-speed segmented diamond blade. This general-purpose high-speed blade features a .394-inch segment height and is available in 12- and 14-inch diameter sizes. The Delux-Cut blade is designed for use on high-speed saws and walk-behind saws of 20 hp or less.

Back to Top

Circular saw blade
Hitachi introduces the 725213 VPR Series framing circular saw blade. This 7 1/4-inch 24-tooth premium blade features an alternating tooth bevel design for a fast clean cut. The 725213 VPR blade is laser cut from a flat plate of steel, which provides for a flatter blade. The VPR series features a patented proprietary hollow ground tooth design in which each tooth acts like a scoop contributing to the fast, yet smoother cut with less effort from the tool.

Back to Top

Outdoor Power Equipment
Portable generator
Subaru's R1100 portable generator features a maximum output of 1,100 watts. It offers clean and stable power through the use of automated voltage regulation technology. Using an exclusive advanced reverse cooling technology, the R1100 runs quieter and allows it to be fully enclosed without the threat of overheating. This provides an additional 2.5 dbA of sound attenuation. The R1100 comes standard encased in a sound-absorbing poly-resin case.

Back to Top

Walk-behind mini-trencher
Little Beaver introduces the Kwik-Trench walk-behind mini-trencher that is designed to trench up to 30 feet per minute. The Kwik-Trench trenches up to 12 inches deep and features carbide-tipped, heat-treated hardened-steel teeth for improved performance. Trench width sizes vary from 1 inch to 4 inches and are obtained through various combinations of teeth styles and mounting locations. A slip clutch is built into the hub of the cutter wheel, protecting the engine and drive train from wear and damage.

Back to Top

Concrete Masonry and Saws
Masonry saw
The TS 400 from Husqvarna is a universal masonry saw with a height adjustment device that is lockable in any position. The saw has several patented features including the blade quick disconnect flange, with no tool required, and semi-automatic foldable/collapsible legs for easier handling. Featuring a laser pointer to allow for easier positioning and exact cuts, the TS 400 also has a head that is easily adapted for 12-inch, 14-inch and 16-inch blades. The head also oscillates with a gas-operated jack for smooth positioning that can be locked in any position.

Back to Top

Diamond core drill
The ETN/3P diamond core drill from CS Unitec can be used wet or dry, hand-held or stand mounted. The 17-amp, 110-volt motor drills holes up to 6 inches diameter in concrete, reinforced concrete, brick, block and stone. An integrated water swivel is built directly into the spindle for wet drilling when required. For concrete dust extraction, while dry drilling, the ETN 152/3P can be connected to a vacuum with a standard hose connection.

Back to Top

Other Products
Cleaning system
The SideWinder model 105 from Hydramotion Cleaning Systems is designed for use with both hot and cold pressure washers. The machine cuts cleaning time and water usage for pressure washing of roofs, decks, sidewalks and other paved surfaces. The HydraFlow cover features a fluted design that creates a focused spray pattern at the external radius of the spray bar arc for an improved cleaning effect.

Back to Top

Sprayer
Apollo Sprayers introduces the enhanced range of Apollo Turbines (The Green Machines) designed to operate a non-bleed turbine spray gun with maximum spray transfer efficiency. The three units -- the A725, the A825 and the A1025 -- feature the Handi-Hold spray gun docking station, which meets and exceeds air quality standards. The Handi-Hold innovation is safe storage for the spray gun and provides easy access.

Back to Top

Drain-cleaning machine
Electric Eel Mfg. announces a newly designed belt guard for the Model E drain-cleaning machine. The new guard is constructed of heavy-duty thermo plastic and mounts securely to the motor with a thumb screw. The guard can be easily removed for changing belts or removing the cable drum.

Back to Top