|
|
Earth-Moving
Mini-skid steer
The Boxer 530X mini-skid from Compact Power offers a 30-hp
Kohler engine and a two-pump 3,000-psi, 14.5-gpm hydraulic system to
drive the machine's auxiliary and propulsion systems. An integrated
track system retracts from a fully extended 43.5 inches to a width of 35
inches. The variable track design allows the operator to maneuver the
530X through tight areas, such as gates and sidewalks. The 9-inch-wide
tracks also provide 3.3 psi of ground pressure to reduce damage to
existing lawns or landscapes.
Back to Top
Compact tractor loader
backhoe
The Allmand TLB-325 heavy-duty
compact-tractor-loader backhoe is powered by either a Kohler or a Subaru
25-hp gasoline engine. The 4,045-pound machine offers a 4,611-pound
digging force as well as an 8-foot, 10-inch digging depth. Dual
cylinder, 180-degree hydraulic cushioned swing allows precise work in
tight areas, while joystick controls and an elevated seating position
provide a large backhoe feel. Allmand's ESL backhoe design reduces
friction and extends service intervals by eliminating metal-to-metal
contact, retaining grease levels and keeping out debris.
Back to Top
Saws
Walk-behind saw
Stow Construction
Equipment introduces the CS-7060 walk-behind saw, which features
patented stay-level handles that remain level regardless of the saw's
operating position. These handles, along with the saw's moving center of
gravity, minimize operator fatigue and reduce the risk of back injury
while boosting productivity. Fueled by a 60-hp Deutz diesel engine, the
CS-7060 saw has a 36-inch blade capacity and a maximum cutting depth of
15 inches. The unit weighs 1,725 pounds.
Back to Top
Walk-behind saw
The PS4030 Series walk-behind saw from Multiquip is powered by a 31-hp
Deutz diesel engine. This unit is equipped with a fully enclosed
self-lubricated blade shaft assembly, requiring no greasing, which
promotes accurate sawing, precise tracking and prevents premature blade
wear associated with common pillow-block bearings. The 30-inch blade
capacity saw also features a maintenance-free wheel drive system,
automatic parking brake system, blade spindle alignment and simple
maintenance requirements.
Back to Top
Breakers
Gas-powered breaker
Designed for small jobs or working in remote locations, the new Red
Hawk gas-powered breaker from Chicago Pneumatic
features quiet operation and zero set-up time for a range of
applications. It delivers an impact rate of 2,600 blows per minute and
weighs 50 pounds, making the breaker easy to transport around a jobsite.
An assortment of 19 tools and accessories are available for the Red
Hawk, giving the unit versatility for concrete breaking, asphalt
cutting, digging, post driving, soil compacting and tie-tamping.
Back to Top
Breaker
The Hilti TE 905 breaker with
active vibration reduction and a double-casing design with a metal
housing is designed for operator comfort. The tool's AVR system, no-load
hammering and kickback dampening device reduces stress on the tool,
which translates into more productivity and less servicing for rental
customers, the company says. Utilizing power input of 1,600 watts, the
TE 905 has a hammering speed of 2,200 blows per minute and single impact
energy of 12.5 foot pounds.
Back to Top
Demolition tools
Brunner & Lay manufactures
a wide range of demolition tools in the United States for use with most
types of heavy-duty, boom-mounted breaker machines in use worldwide. Its
tools are manufactured from high-quality steel, which is then
heat-treated in ultra modern pit-type furnaces to create the hardness,
impact strength and durability required to face the arduous conditions
found in quarrying and mining, the company says. Brunner & Lay's range
of tools include points, chisels, blunts, and other specialized working
ends.
Back to Top
Floorcare
Floor grinders
The ProGrind floor grinders from Husqvarna don't require a main
service -- bearings/belt change -- until around 1,000 to 1,500
hours; service to the planetary drive sprocket around 500 hours; and
service to the planetary chain ring between 500 to 1,000 hours.
Back to Top
Other Products
Drain cleaner
The Handy-Stand turns the Super-Vee power drain cleaner from General Pipe Cleaners into a
countertop or floor machine. The lightweight Handy-Stand can be
positioned either horizontally or vertically for optimal customer
convenience. Additional features include a quick-release clamp for
securing the drain cleaner into position, four-point base for increasing
stability and customer safety, and a power cord holder for fewer work
obstructions.
Back to Top
Level
The 24-inch Tip-Proof Level with Magnetic V-Groove from Mayes Brothers Tool Manufacturing, a
division of Great Neck Saw Manufacturers provides a tip-proof design
that streamlines work activities and offers an increased degree of
safety. Other design benefits include three high-visibility precision
vials with protective acrylic windows that provide easy-to-read accurate
measurements; rubberized ends to reduce surface marring; and polystyrene
construction for strength and durability.
Back to Top
Stump grinder
Bandit introduces the
Model HB20 SideWinder stump grinder, which offers a pivot-action base
that allows the operator to keep the wheelbase stationary while using a
smooth gliding motion back and forth to grind stumps. The user can
position the HB20 in close proximity to the stump, release the pivot
pin, and swing the handlebars from side-to-side. The HB20 SideWinder is
available with a 20-hp Kohler gas engine and a 19-inch cutterhead with
24 teeth. Compact and maneuverable, this handlebar unit is designed for
tree services and rental businesses looking for a convenient and
efficient way to grind isolated stumps in tough locations.
Back to Top
|
|
You are subscribed to this newsletter as #email#
To get this newsletter in a different format (Text or HTML),
or to change your e-mail address, please visit your profile
page to change your delivery preferences.
For questions concerning delivery of this newsletter, please contact our
Customer Service Department at:
Customer Service Department
RER Magazine
A Penton Media publication
US Toll Free: 866-505-7173
International: 847-763-9504
Email:rermag@pbinews.com
Penton Media | 249 W. 17th Street | New York, NY 10011
Copyright 2007, Penton Media. All rights reserved. This article is
protected by United States copyright and other intellectual property
laws and may not be reproduced, rewritten, distributed, re-disseminated,
transmitted,
displayed, published or broadcast, directly or indirectly, in any medium
without the prior written permission of Penton Media.
|
|
