|
|
Earth-Moving
Compact loader
The Toro Dingo TX 525 Wide Track
model is designed with auxiliary hydraulics to provide power in tough
soil conditions. Featuring four independent hydraulic pumps, the TX 525
delivers 16.9 gpm of flow to each track, 13.8 gpm to the auxiliary and 6
gpm to the loader arm. Weighing in at 2,127 pounds with a standard
bucket, the compact loader has a rated operating capacity of 553 pounds.
Back to Top
Compact excavators
Four Case Construction
Equipment CX compact excavators have been upgraded to be Tier 2
certified, increasing horsepower, hydraulic pressure and hydraulic flow
for more efficient operation. These upgraded models -- the CX27B,
CX31B, CX36B (pictured) and CX50B -- feature an overall 19-percent
increase in engine horsepower, a 15-percent increase in hydraulic flow
and a 14-percent increase in hydraulic horsepower. All models are
equipped with a hydraulically controlled backfill blade for added
machine stability and light dozing work. The upgraded models continue to
offer zero-tail swing and a center-swing boom for maximum productivity
in tight working spaces.
Back to Top
Lifting
Portable scaffold
Werner's PS-48 portable
scaffold provides multiple working heights, is lightweight and sets up
in seconds, and features smooth gliding wheels. With a highest standing
level of 30 1/8-inches and a width of 46 1/8-inchs, the scaffold
provides more than a 6-foot reach and has a load capacity of 500 pounds.
It can double as a workbench or multi-level storage/organization unit.
High-grade wheels prevent marring surfaces and lock in place for extra
safety and security.
Back to Top
Telehandler
The Cat TL1255 from Caterpillar is a rugged
telehandler with a 12,000-pound capacity and the capability of lifting
5,000-pound loads up to 55 feet. Its heavy-duty boom has 42.5-feet of
maximum reach and a 3,500-pound load capacity at maximum reach with the
stabilizers deployed. The TL1255 features a pilot-operated joystick that
proportionally controls raise/lower, tilt and extension, three steering
modes and 10-degree control of left to right frame leveling.
Back to Top
For Contractors
Chisels
Designed for use in both electric and pneumatic breakers with 1
1/8-inch chunks, the steel hex shank chisels join Hilti's family of self-sharpening
chisels. Made with a polygon design using an inductive hardening
process, these long-lasting chisels stay sharp to help customers improve
their performance, productivity and comfort.
Back to Top
Wet/dry vacuum
The compact CS 1500 wet/dry vacuum from CS Unitec can be used for various
construction or industrial cleaning applications. The unit is designed
for collecting concrete dust, concrete slurry and jobsite debris. The
heavy-duty plastic poly filter bag holds up to 10 gallons and allows for
simple, safe disposal of the waste.
Back to Top
Compact masonry saw
The MS3 compact masonry saw from Stow Construction Equipment
is built for brick masons, paving installers and other masonry
professionals. Powered by a 2.5-hp, 50/60 Hz, 115-V electric motor, the
MS3 has a 14-inch blade capacity and cuts up to 5 inches deep. Standard
features are a solid, die-cast cart, security lock bar, roller wheel
bearings, precise tracking, 3-head position posi-lock knob and internal
spring assist. The MS3 weighs 70 pounds and options include a water kit
and folding stand.
Back to Top
Nailer and stapler kits
DeWalt introduces the D51236K,
a 1 1/4-inch brad nailer (pictured), the D51420K, a 1-inch narrow crown
stapler kit, and the D51422K, a 1 1/2-inch narrow crown stapler kit.
With each kit weighing less than 3.3 pounds, the lightweight brad nailer
and narrow crown finish staplers are each protected by a sturdy,
magnesium body that allows the tools to survive drops and withstand
jobsite abuse. Each tool is equipped with a trigger lock-off, a safety
feature that allows the trigger to be disabled when it is not in use to
prevent accidental discharge.
Back to Top
Industrial wet/dry vacuums
Ridge Tool Co. introduces its
new line of Ridgid industrial two-stage wet/dry vacuums, which are
designed specifically for clean up of heavy debris and liquids. Two
models are available, offering a 14-gallon and 16-gallon drum. The
stronger, quieter RV two-stage proprietary motor series and its patented
blower wheel are designed to handle heavy debris and liquid more quickly
and efficiently. A three-layer pleated filter has a large surface area
for increased motor efficiency and long life. The two models convert to
a blower, with 150 mph blowing velocity. An automatic suction shut-off
function senses and prevents liquid overflow.
Back to Top
For Homeowners/Light Contractors
Brush chippers
Morbark adds the Clipper 6 to
its line of brush chippers. The 6-inch capacity drum-style unit is
designed for the rental market, landscape companies, nurseries and
homeowners. The compact machine comes with a 2-inch ball towing hitch
and a tubular steel frame to facilitate transport. Offered standard with
an auto-feed system, a 30-inch by 20-inch infeed chute, and 10 1/2-inch
by 7-inch throat opening, the chipper is designed to give users
exceptional chipping abilities in a machine of its size. A hydraulic
drum brake, which brings the drum from full rpm to a complete stop in 8
seconds, allows the Clipper 6 to provide maximum production while saving
wear and tear on the machine.
Back to Top
|
|
You are subscribed to this newsletter as #email#
To get this newsletter in a different format (Text or HTML),
or to change your e-mail address, please visit your profile
page to change your delivery preferences.
For questions concerning delivery of this newsletter, please contact our
Customer Service Department at:
Customer Service Department
RER Magazine
A Penton Media publication
US Toll Free: 866-505-7173
International: 847-763-9504
Email:rermag@pbinews.com
Penton Media | 249 W. 17th Street | New York, NY 10011
Copyright 2007, Penton Media. All rights reserved. This article is
protected by United States copyright and other intellectual property
laws and may not be reproduced, rewritten, distributed, re-disseminated,
transmitted,
displayed, published or broadcast, directly or indirectly, in any medium
without the prior written permission of Penton Media.
|
|
