|
|
Earth-Moving
Excavators
The new John Deere D-Series
Excavators retain many features of their predecessors, but significant
improvements -- including faster hydraulics, a totally redesigned cab,
undercarriage enhancements, and a new cooling system -- deliver a boost
in productivity and uptime, as well as lower daily costs. Key to the
D-Series' enhanced productivity is the faster hydraulic system, which
boosts productivity by up to eight percent. Drawbar pull, swing torque,
lift capacity and arm force also have improved significantly.
Back to Top
Skid-steer loader
The new S330 skid-steer loader from Bobcat is the company's largest skid
steer, with a 3,300-pound rated operating capacity. With a 10-foot,
10-inch lift height, the S330 works in construction, landscaping and
agricultural markets. Its 85-hp, liquid-cooled diesel engine with
increased displacement and horsepower means an increase in pushing power
and drive torque when digging. To facilitate attachment operation, the
machine features standard fingertip auxiliary hydraulic control,
maximum/variable flow and forward/reverse detent. Standard two-speed
travel increases the loader's mobility around jobsites by providing a
6.9-mph normal travel speed and a 12-mph high travel speed.
Back to Top
For Contractors
Saw
Featuring smart, new motor technology created with the user in
mind, the comfortable cutting position demonstrates Husqvarna's K 750's power.
Special features include dual-charge engine technology that produces
5-hp with improved fuel economy and 70-percent fewer emissions. The
vibration damping system offers 50-percent lower vibrations and smoother
cutting. The saw features a 25-percent lower noise level because of a
larger muffler. Active Air Filtration, with its centrifugal cleaning,
adhesive filter and paper filter, increases the service life and gives
the unit longer service intervals.
Back to Top
Concrete slab buster
The Allied Hammerhead II Model HB 550 from Allied Construction Products is a
1,130-pound hydraulic concrete slab buster that mounts easily on a
5,000- to 9,000-pound skidsteer, 7,000- to 15,000-pound mini-excavator
or 9,000- to 16,500-pound loader/backhoe. A single blow of the slab
buster rubblizes concrete, reducing labor-intensive jobs to fast
demolition and cleanup. The HB 550 is designed to demolish concrete
flatwork up to 10 times faster than traditional methods, according to
the company.
Back to Top
Trailer
The Demco Model DT6000HD aluminum tilt-bed trailer from Dethmers Manufacturing features
a GVWR 5,980-pound capacity. The overall trailer length is 20 feet,
while the bed length is 14 feet. The maximum loading degree incline is
15 degrees. The trailer features surge brakes on all four wheels with
self-adjusting uni servo brake shoes. Standard features include winches
and tie-down chains, and the trailer also comes equipped with
rubber-torsion axle suspension.
Back to Top
Vibratory rollers
Multiquip's new tandem and
combination vibratory rollers are available in the 1.5- to 5-ton weight
class and are built for maximum jobsite performance with high-frequency
vibration, operator comfort, safety features and a maintenance-free
service concept. Ten diesel-powered models are available in the AR
Series with drum widths from 31 to 51 inches. Centrifugal forces range
from 2,925 pounds on the AR-16 to 10,790 pounds on the AR-40. Standard
features on the vibratory rollers include ROPS, dual frequency and
amplitude, backup alarms, pressurized water systems with dual
filtration, noise attenuation and lockable instrument panels. The AR
Series rollers carry the MQ/Rammax brand name to complement Multiquip's
full line of light- and medium-sized compaction equipment, which already
includes rammers, plate compactors, and trench and asphalt rollers.
Back to Top
Brush chipper
Rayco's RC 12 brush chipper
is designed to deliver the power, performance and features typically
seen on larger machines. The 86-hp Cat diesel engine and Rayco's PULSE
down pressure system ensure top performance on any type of material.
Features such as a self-adjusting hydraulic clutch, planetary feed wheel
motor, few grease points and a large service door over the engine help
keep maintenance costs and downtime to a minimum. At more than 6,000
pounds, the heavy-duty, drum-style chipper is built to withstand harsh
jobsite conditions.
Back to Top
Air saw
The CS 71773 air saw from CS
Unitec is designed to cut through reinforced concrete, brick, block,
concrete pipe, rock and natural stone. The air saw is capable of plunge
cuts up to 14 inches deep in one pass and can cut square corners for
doors and windows. The saw can be used hand-held or with the optional
SpeedHook guide to make straight cuts through walls and other surfaces.
The CS 71773 can be used with a range of diamond saw chains to cut a
variety of concrete and masonry materials.
Back to Top
For Homeowners/Light Contractors
Ride-on platform
The Toro Company introduces the
TX platform, a ride-on attachment for tracked Toro Dingo compact utility
loaders. The platform helps decrease operator fatigue and increase
comfort, especially in applications that require extensive hauling or
cover substantial distances. The TX Platform is designed to provide a
safe, smooth ride by pivoting up and down to float with uneven terrain,
which allows for a stable and level platform for the operator. A rubber
pad at its hinge point reduces transmission of machine vibration to the
user. The platform is accompanied by a handlebar that can be mounted to
the dash for added operator safety. Constructed of heavy-duty steel, the
platform measures 29 inches wide, operates 5 inches above the ground and
weighs 94 pounds. When not in use, it folds up and stores against the
machine in a locked position.
Back to Top
Tool transport and storage
The Fold-A-Cart yard
cart is a versatile, 2-wheel, full-size cart that folds down for
transport and storage. The cart is available in two versions, the home
and garden model and the professional model. Both have a range of uses,
including home, garden and landscaping applications. The home version
offers a carrying capacity of 6 cubic feet and 200 pounds. The
professional series delivers 9 cubic feet and 400 pounds of carrying
capacity. Both versions have a durable, Flextron tub guaranteed for 10
years.
Back to Top
|
|
You are subscribed to this newsletter as #email#
To get this newsletter in a different format (Text or HTML),
or to change your e-mail address, please visit your profile
page to change your delivery preferences.
For questions concerning delivery of this newsletter, please contact our
Customer Service Department at:
Customer Service Department
RER Magazine
A Penton Media publication
US Toll Free: 866-505-7173
International: 847-763-9504
Email:rermag@pbinews.com
Penton Media | 249 W. 17th Street | New York, NY 10011
Copyright 2007, Penton Media. All rights reserved. This article is
protected by United States copyright and other intellectual property
laws and may not be reproduced, rewritten, distributed, re-disseminated,
transmitted,
displayed, published or broadcast, directly or indirectly, in any medium
without the prior written permission of Penton Media.
|
|
